Raw material from POSCO
Stainless steel tube
Specifications:
1) Diameters: 4 - 76.2mm
2) W. T.: 0.4 - 2.5mm
3) Grades: 316L/304/304L/310S, etc.
4) Standard: GB/ISO/EN/ASTM/JIS, etc.
5) Application range: Widely use in the foodstuff, medical equipment, power, boiler, cooler, auto, condenser etc.
6) Packing: Inner packing: 1 PC/plastic bag; Outer packing: Bundles in weaving bags or in plywooden case.
(2)The thick the deviation of admission( do not include the weld sew) in wall of the weld tube is for ruling the wall thick 10% of ± , but minimum admission deviation is the 0.02 mms of ± .
(3)The weld takes care of of settle Chinese foot length as 3 ms~9 ms, general settle the Chinese foot with the 6 ms.
(4)The weld takes care of of settle the Chinese foot length in usually length, its the deviation of admission is the 5 mms of ± .
(5)Adopt partial the degree of flinch in a the tube of weldfor keeping the Chinese foot measurement should not very in 2.0 mms.
2, The machine function sees the table 5
table 5
Stainless steel tube
Specifications:
1) Diameters: 4 - 76.2mm
2) W. T.: 0.4 - 2.5mm
3) Grades: 316L/304/304L/310S, etc.
4) Standard: GB/ISO/EN/ASTM/JIS, etc.
5) Application range: Widely use in the foodstuff, medical equipment, power, boiler, cooler, auto, condenser etc.
6) Packing: Inner packing: 1 PC/plastic bag; Outer packing: Bundles in weaving bags or in plywooden case.
| IOutside path in class deviation mm table 3 | Outside path inII class deviation mm table 4 | |||||||||||||||||||||||||||||
|
|
(2)The thick the deviation of admission( do not include the weld sew) in wall of the weld tube is for ruling the wall thick 10% of ± , but minimum admission deviation is the 0.02 mms of ± .
(3)The weld takes care of of settle Chinese foot length as 3 ms~9 ms, general settle the Chinese foot with the 6 ms.
(4)The weld takes care of of settle the Chinese foot length in usually length, its the deviation of admission is the 5 mms of ± .
(5)Adopt partial the degree of flinch in a the tube of weldfor keeping the Chinese foot measurement should not very in 2.0 mms.
2, The machine function sees the table 5
table 5
| Steel number | Card number | The heat handles Make degree | The anti- pulls the strength MPa | Accept defeat the strength MPa | Extension rate% | Degree of hardnessHRB |
| 0Cr19N19 | 304 | ≥ 1010° C Nasty and cold | ≥ 520 | ≥ 205 | 40 | ≤ 90 |
| 00Cr19Ni11 | 304L | " " | ≥ 480 | ≥ 175 | 40 | ≤ 90 |
| 0Cr17Ni12M02 | 316 | " " | ≥ 520 | ≥ 205 | 40 | ≤ 90 |
| 0Cr17Ni14M02 | 316L | " " | ≥ 480 | ≥ 175 | 40 | ≤ 90 |
| 0Cr18Ni11Ti | 321 | ≥ 920° C Nasty and cold | ≥ 520 | ≥ 205 | 40 | ≤ 90 |